                            RESCUE.TXT
                       for PartitionMagic

The rescue disks contain the necessary files to boot your 
computer and run PQMAGIC (PartitionMagic 5.0 DOS GUI 
version). You must boot from the first rescue disk.

This rescue disks will be useful in the following 
situations:

-If you have hidden the hard disk partition where PartitionMagic is 
installed and need to get back into PartitionMagic to unhide the 
partition.

-If you have accidently converted a partition to FAT32 when your 
operating system does not support FAT32 and now your computer will 
not boot.  (Use the PartitionMagic rescue disks to convert the 
partition back to FAT.)

-If you only have Windows NT 3.51 on your computer, and you need 
to manipulate the NT boot partition (the one with the Windows 
directory).

-If other occasions arise when you do not have access to 
PartitionMagic on the CD or hard disk.


        
To use the PartitionMagic rescue disks:
---------------------------------------

1. Boot your computer from the first PartitionMagic rescue 
   disk.

2. Insert the second rescue disk when prompted.

   PQMAGIC will run automatically.

Although PQMAGIC is a DOS program, it is a full GUI application 
and has the same functionality as PartitionMagic for Windows.

To access online help, insert the second rescue disk, then choose 
Help from the PQMAGIC menu.

For additional information about running PartitionMagic from
the rescue disks, refer to Chapter 6 of the PartitionMagic
user guide.

========================================================================

For all other technical support issues, contact PowerQuest 
Technical Support.

Ways to contact PowerQuest Technical Support:

Voice:  (801) 437-8900
Fax:  (801) 437-4218
Web site:  www.powerquest.com/support/
E-mail:  help@powerquest.com